Showing 1–16 of 27 results
The LTF emulsifier is a microfluidic system for the simple production of multiphase emulsion droplets, where the droplet size can be controlled by the flow rate. The reactor has an integrated heat exchanger and will be connected via 1/2″ bonded glass threads, while the heat exchanger is connected via SWAGELOK fittings. More information can be found in the product sheet.
plus Shipping Costs
LTF’s micromixer HTM-KOE will be used as delay time for pre- or post-conditioning. The reactor is available either with or without an integrated heat exchanger.
Main properties:
plus Shipping Costs
LTF’s micromixer HTM-S will be used for higher flow rates. The mixer is available either with or without an integrated heat exchanger.
Main properties:
plus Shipping Costs
LTF’s micromixer HTM-ST will be used for small volumes of very mixing-intensive substances, even at low flow rates. The mixer is available either with or without an integrated heat exchanger.
Main properties:
plus Shipping Costs
LTF’s micromixer HTM-ST-2-1 will be used for small volumes of very mixing-intensive substances, even at low flow rates. In contrast to HTM-ST this mixer has a longer mixing distance. The mixer is available either with or without an integrated heat exchanger.
Main properties:
plus Shipping Costs
LTF’s micromixer HTM-ST-2-1 will be used for small volumes of very mixing-intensive substances, even at low flow rates. In contrast to HTM-ST-2-1 this mixer has an additional inlet. The mixer is available either with or without an integrated heat exchanger.
Main properties:
plus Shipping Costs
LTF’s micromixer HTM-X will be used for small volumes of mixing-intensive substances, even at low flow rates. The mixer is available either with or without an integrated heat exchanger.
Main properties:
plus Shipping Costs
LTF RS T is a micromixer with 3 inlets modified for the production of nanoparticles.
Main properties:
LTF RS V is a micromixer with 2 inlets high throughput modified for the production of nanoparticles.
Main properties:
LTF’s MR-LAB-Kat is a modified MR-LAB-MS micromixer with an integrated catalyst. MR-LAB-KAT-G is a cross flow version where the integrated catalyst channel can be loaded with catalytic acting grains, powder or coated carriers like activated carbon or coated glass powders.
Main properties:
plus Shipping Costs
LTF’s MR-LAB-Kat is a modified MR-LAB-MS micromixer with an integrated catalyst. At MR-LAB-KAT-R the flow goes along an inserted catalyst rod (inside in the catalyst channel), where the flow is then 100 mm in contact with the catalyst rod.
Main properties:
plus Shipping Costs
MR-LAB-MS is a micromixer used for higher flow rates. The mixing type S is simply structured by means of “chicanes”, which makes the mixer not sensitive to blockage.
Main properties:
MR-LAB-MX is a micromixer used for small volumes of mixing-intensive substances, even at low flow rates.
Main properties:
MR-LAB-V is a microreactor used as delay time for pre- or post-conditioning.
Main properties:
plus Shipping Costs
MR-LAB-VS is a microreactor used as delay time for pre- or post-conditioning of mixing-intensive substances.
Main properties:
plus Shipping Costs
MR-Pilot-1 is a Micromixer made of borosilicate glass used for dwell time for substances which have to be intensively mixed. Main properties: