Showing 1–16 of 41 results

Emulsifier

The LTF emulsifier is a microfluidic system for the simple production of multiphase emulsion droplets, where the droplet size can be controlled by the flow rate. The reactor has an integrated heat exchanger and will be connected via 1/2″ bonded glass threads, while the heat exchanger is connected via SWAGELOK fittings. More information can be found in the product sheet.

plus Shipping Costs

FLOW CHEMISTRY STARTER SET

Content:

4 x MR Lab reactors incl. connection bar 2 x single syringe pumps
1 x Frame work 10 m PTFE tube 1/8″
10 x fittings 1/8″ 10 x ferrules 1/8″
2 x 20 ml plastic syringe 1 x Manual for 13 reactions

 

plus Shipping Costs

Fluidic chip holder

With LTF’s chip holder fludic chips will be connected with external equipment via 1/4″ UNF 28 threads at the top. The holder user-friendly and suitable for:

  • T-25
  • T-26
  • T-27
  • T-28
  • T-29

plus Shipping Costs

HTM-KOE

LTF’s micromixer HTM-KOE will be used as delay time for pre- or post-conditioning. The reactor is available either with or without an integrated heat exchanger.

Main properties:

  • no dead volume
  • simple to operate
  • space-saving in use
  • greater pressure stability as required is possible upon request
  • 1/4″ UNF 28 connection bar included

plus Shipping Costs

HTM-S

LTF’s micromixer HTM-S will be used for higher flow rates. The mixer is available either with or without an integrated heat exchanger.

Main properties:

  • no dead volume
  • simple to operate
  • space-saving in use
  • greater pressure stability as required is possible upon request

plus Shipping Costs

HTM-ST

LTF’s micromixer HTM-ST will be used for small volumes of very mixing-intensive substances, even at low flow rates. The mixer is available either with or without an integrated heat exchanger.

Main properties:

  • no dead volume
  • simple to operate
  • space-saving in use
  • greater pressure stability as required is possible upon request

plus Shipping Costs

HTM-ST-2-1

LTF’s micromixer HTM-ST-2-1 will be used for small volumes of very mixing-intensive substances, even at low flow rates. In contrast to HTM-ST this mixer has a longer mixing distance. The mixer is available either with or without an integrated heat exchanger.

Main properties:

  • no dead volume
  • simple to operate
  • space-saving in use
  • greater pressure stability as required is possible upon request

plus Shipping Costs

HTM-ST-3-1

LTF’s micromixer HTM-ST-2-1 will be used for small volumes of very mixing-intensive substances, even at low flow rates. In contrast to HTM-ST-2-1 this mixer has an additional inlet. The mixer is available either with or without an integrated heat exchanger.

Main properties:

  • no dead volume
  • simple to operate
  • space-saving in use
  • greater pressure stability as required is possible upon request

plus Shipping Costs

HTM-X

LTF’s micromixer HTM-X will be used for small volumes of mixing-intensive substances, even at low flow rates. The mixer is available either with or without an integrated heat exchanger.

Main properties:

  • no dead volume
  • simple to operate
  • space-saving in use
  • greater pressure stability as required is possible upon request

plus Shipping Costs

LTF RS T

LTF RS T is a micromixer with 3 inlets modified for the production of nanoparticles.

Main properties:

  • no dead volume
  • simple to operate
  • space-saving in use
  • high throughput
  • greater pressure stability as required is possible upon request
  • 1/4″ UNF 28 connection bar included

LTF RS V

LTF RS V is a micromixer with 2 inlets high throughput modified for the production of nanoparticles.

Main properties:

  • no dead volume
  • simple to operate
  • space-saving in use
  • greater pressure stability as required is possible upon request
  • 1/4″ UNF 28 connection bar included

MR-LAB-Kat-G

LTF’s MR-LAB-Kat is a modified MR-LAB-MS micromixer with an integrated catalyst. MR-LAB-KAT-G is a cross flow version where the integrated catalyst channel can be loaded with catalytic acting grains, powder or coated carriers like activated carbon or coated glass powders.

Main properties:

  • no dead volume
  • simple to operate
  • space-saving in use
  • greater pressure stability as required is possible upon request
  • 1/4″ UNF 28 connection bar included

plus Shipping Costs

MR-LAB-Kat-R

LTF’s MR-LAB-Kat is a modified MR-LAB-MS micromixer with an integrated catalyst. At MR-LAB-KAT-the flow goes along an inserted catalyst rod (inside in the catalyst channel), where the flow is then 100 mm in contact with the catalyst rod.

Main properties:

  • no dead volume
  • simple to operate
  • space-saving in use
  • greater pressure stability as required is possible upon request
  • 1/4″ UNF 28 connection bar included

plus Shipping Costs

MR-LAB-MS

MR-LAB-MS is a micromixer used for higher flow rates. The mixing type S is simply structured by means of “chicanes”, which makes the mixer not sensitive to blockage.

Main properties:

  • no dead volume
  • simple to operate
  • space-saving in use
  • greater pressure stability as required is possible upon request
  • 1/4″ UNF 28 connection bar included

MR-LAB-MX

MR-LAB-MX is a micromixer used for small volumes of mixing-intensive substances, even at low flow rates.

Main properties:

  • no dead volume
  • simple to operate
  • space-saving in use
  • greater pressure stability as required is possible upon request
  • 1/4″ UNF 28 connection bar included